 |
Clayton Power Lithium Ion Auxiliary Battery as a System
The auxiliary battery on the basis of a lithium solution from LEAB exclusively offers its customers the world's first completely lithium-based 230V power supply system from the manufacturer CLAYTON POWER which can be integrated in vehicles of all kinds.
The lithium batteries are available with a choice of 12V or 24V voltage. Battery capacity is 100Ah, several batteries can be linked together to increase capacity. The innovative battery management system permits complete control over every single cell at all times.
- Can be charged in 60 minutes
- 1/3 of the weights*
- 1/3 of the space*
- 10 times the service life*
- Greater economy*
- Greater efficiency*
- Environmentally friendly
* compared with conventional lead batteries (with 80% discharge)
Lithium technology compared
With lithium you can get more energy from your batteries over a longer period.
With a consumption of 2000 W, four 12 V / 100 Ah batteries from CLAYTON POWER supply energy for 1 hour and 45 minutes. One 440 Ah AGM battery, on the other hand, only has a running time of 45 minutes.
The lithium battery can be completely charged in less than 4 hours, whereas an AGM battery requires at least 8 - 10 hours for a complete charge.
Yet at the same time, the energy store in innovative lithium technology only weighs about one third of a conventional battery bank and requires two thirds less space than a conventional battery.
At 3000 cycles, the service life of the lithium-ion battery is significantly higher than the maximum 400 cycles of an AGM battery.
Vehicles with mobile lithium power supply - lighter, more ready for use, more independent.
Example for a lithium auxiliary battery set-up
| Type | Lithium Power Pack 12V / 100Ah | Lithium Power Pack 24V / 100Ah |
|---|---|---|
| Art. no. | 012-00002GF | 012-00004GF |
| Capacity [Ah] | 100 | 100 |
| Nominal voltage [V] | 12 | 24 |
| Lower voltage limit [V] | 9,2 | 18,4 |
| Upper voltage limit [V] | 15 | 30 |
| Permanent discharge current [A] | 100 | 100 |
| Peak discharge current (5 sec.) [A] | 500 | 500 |
| Permanent charging current [A] | 100 | 100 |
| Peak discharge current (5 sec.) [A] | 500 | 500 |
| Short-circuit switch-off (10µS) [A] | 1000 | 1000 |
| Cycles (at 80% depth of discharge) | 3000 | 3000 |
| Parallel connection | 1 to 20 | 1 to 20 |
| IP-class | IP21 | IP21 |
| Dimensions [mm] | 300 x 275 x 195 | 555 x 275 x 195 |
| Weight [kg] | 19 | 36 |
| Standards | DIN EN 61204-3:2000, DIN EN 55011:2009 + A1:2010, DIN EN 55022:2006 + A1:2007, DIN EN 55024:2010, DIN EN 61000-4-2:2009, DIN EN 61000-4-3:2008, DIN EN 61000-4-4:2010, DIN EN 61000-4-5:2007, DIN EN 61000-4-6:2009 | DIN EN 61204-3:2000, DIN EN 55011:2009 + A1:2010, DIN EN 55022:2006 + A1:2007, DIN EN 55024:2010, DIN EN 61000-4-2:2009, DIN EN 61000-4-3:2008, DIN EN 61000-4-4:2010, DIN EN 61000-4-5:2007, DIN EN 61000-4-6:2009 |
| Marks of conformity | CE, Directive 2004/108/EG | CE, Directive 2004/108/EG |
